Uncategorized

Fan 800 , HyBlade vs AxiBlade

کاور مقاله فن 800 ای بی ام ebm

ebm-papst has launched AxiBlade, a new generation of optimized axial fans.

The purpose through this handout is a brief comparison with bringing some technical specifications from below models of ebm-papst’s fans:

(8317078523)(VWA0800B7SNZ ( W6D800KG1301

  • A6D800AD0101I(W6D800GD0125)

 

The advantages of AxiBlade at a Glance:

1. Optimum efficiency of up to 38.53% while HyBlade is equivalent to 33.35%(15%)

Through curve 2, it’s considerable.

It means:

Every engineer and fan designer knows about how challenging it can be to raise 1 unit in efficiency term and the long way to achieve, so use this 5-unit boost (33.35% to 38.5%) at ease.

 مدل های فن محوری ای بی ام VWA0800B7SNZ و W6D800KG1301 و 8317078523 در مقایسه با مدل W6D800GD0101 و W6D800GD0125 منحنی راندمان   2. A noise reduction through fan’s installation inside the unit Through curve 3: AxiBlade’s Noise level inside the unit: 80.9 dB HyBlade’s Noise level inside the unit: 82.9 dB   It means: Due to aerodynamical performance of the Axiblade impeller noise levels will not increase as high as with the HyBlade fans once built into a unit. Although it is true that Noise level outside the unit for Axiblade is higher than HyBlade,  just see the results after installation the AxiBlade inside a unit; AxiBlade shows lower Noise level(80.9 dB(A) vs 82.9 dB(A)) Note: the real operational situation is the mounting condition.  مدل های فن محوری ای بی ام VWA0800B7SNZ و W6D800KG1301 و 8317078523 در مقایسه با مدل W6D800GD0101 و W6D800GD0125 منحنی صدا

curve2

  3. No requirement for AxiTop, due to lower noise with Axiblade It means: Omitting the requirement for AxiTop leads to less costs, another benefit of AxiBlade    4. 30% less energy consumption Through curve 1:  HyBlade consumption: 1950 W  AxiBlade consumption: 1400 W (AxiBlade consumes up to 550 W less energy), (30%)  Given a unit with 2 or 3 fans, this difference shows itself more (3*550, 1650 W for a unit)   It means:  less costs for providing electronic parts as VSD and less energy costs.  مدل های فن محوری ای بی ام VWA0800B7SNZ و W6D800KG1301 و 8317078523 در مقایسه با مدل W6D800GD0101 و W6D800GD0125 منحنی توان  

5.  Volume rate change

Through the curve 1:     HyBlade volume rate: 20800 m3/h     AxiBlade volume rate: 19800 m3/h     The difference is 4.8%   Comparing 4 above facts:
  • Any low powered motor doesn’t imply a weakness for a system
An engineering design tends to gain a low energy consumption within an operating point It can be seen that manufacturers don’t work on maximum air flow as a separate parameter, just do on an optimum point; optimum volume rate balancing it against more familiar metrics such as efficiency, power and noise. The way that ebm-papst has been employed to create the Axiblade generation. VWA0800B7SNZ مدل های فن محوری ای بی ام VWA0800B7SNZ و W6D800KG1301 و 8317078523 در مقایسه با مدل W6D800GD0101 و W6D800GD0125 منحنی هوادهی   6. AxiBlade’s degree of protection is IP 55    5, the first digit is related to solids: Protected from limited dust ingress.  5, the second digit is related to liquids: Protected from low pressure water jets from any direction.   7. AxiBlade’s environmental protection class is H2:   H2 testing goes far beyond the requirements of the IP protection classes. ebm-papst has taken environmental conditions of an operating fan into account early on, as your requirements are more than IP classes (to find out more read the “Environmental Protection classes” handout)